Chat with us, powered by LiveChat

24 Years Professional Manufacturer For Time Switch And Timer Control!

Home > News > NEWS >

Why should I clean the car injector?

Why should I clean the car injector?
Issue Time:2019-01-17

Why should I clean the car injector?

The injector is actually a simple solenoid valve. When the solenoid coil is electrified, it generates suction, the needle valve is sucked up, the nozzle is opened, and the fuel is ejected at high speed through the annular gap between the needle and the nozzle at the head of the needle valve, forming a fog, which is beneficial to full combustion.

Control of fuel injection quantity: In the same type of electric injection vehicle, the pressure of gasoline pump is constant, regardless of the throttle opening, as long as the fuel pressure regulator is adjusted, the pressure of the injector is always constant. The injector is used strictly with the fuel pump and the fuel pressure regulator. Only the designed pressure can the injector achieve the best atomization effect, and the pressure is lower than the designed pressure. The oil ejected by pressure is not columnar and not suitable for mixing with air; the oil ejected by excessive pressure is conical and not easy to mix, and the fuel ejected by too much force directly sprays onto the wall of the pipe, directly affecting the mixing ratio parameters.

Whether accelerating or idling, pressure should be constant. Pressure of different types of vehicles is also different (the choice of several gears of cleaning machine is actually the choice of pressure for different types of vehicles, not different pressure of accelerating idling, wrong choice of fuel injection pressure, poor atomization of nozzle)

When the nozzle is blocked, the injection is not smooth, or there are carbon deposits and cementitious compounds in the gap of the nozzle, which can not reach the designed fuel injection volume or atomization effect, so it needs cleaning.

The cleaning of injector should not go on line, let alone feel uncomfortable if it is not washed for a long time.

In fact, the EJV really needs cleaning. One is that the fuel is filtered through the closed mesh of the gasoline pump, and then filtered through the fuel filter, which flows through the gasoline injector. The size of impurity particles is not an order of magnitude compared with the clearance of the injector. The other is that the rubber contained in the gasoline can not be blocked. When passing through the clearance, it is very difficult to keep it, so-called accumulation. What's more, the needle valve and the contact surface are knocked hard many times a day. What's the glue here? Again, most of the cars use the out-of-cylinder injection method, where the temperature is not high, which is several times better than the working environment of spark plug. To be honest, it's difficult to think of some faults.

Really easy to affect the position of atomization should be the outer surface of the nozzle nozzle. A car with poor combustion is prone to backwash and pollute this position. It is also divided into two parts. A good burning car will not backwash, and a car with poor combustion will not backwash. Even if it is cleaned, it will pollute within a few kilometers, and it will be useless to wash it. For example, a car with good combustion will be eradicated before it is cured. The spark plugs are clean; the car that burns badly, even if you change it into a new spark plug, you take it down in five minutes, it's still black, it's all carbon deposits.

Our product FIC-601 can simplify the problem of nozzles. Perfect help car owners to solve car maintenance problems. It has the functions of ultrasonic cleaning, atomization testing, sealed testing, fuel injection quantity testing, automatic cleaning testing and disassembly-free cleaning. Can such a good product help you?

Contact Person
leave a message:
Contact Now
3rd Floor, Building 59, Third Industrial Zone, Xitain Community, Gongming Street, Guangming New District Shenzhen China
Mobile page